筛选Filter
Products
_r__886-1920_c__4c4944_.jpg?x-oss-process=style/small)
Stainless Steel NO.4 Sheet
304 stainless steel sheet #4 finish is the brushed finish commonly seen on kitchen appliances and backsplashes. The 304 stainless steel sheet #4 finish has a PVC film on one side to help protect against scratching during fabrication and installation. Our 304 stainless steel sheet #4 finish meets the criteria for both the #3 and #4 finish.
Stainless Steel Channel
Stainless steel channel steel is a long strip of steel with a groove-shaped cross-section. Stainless steel channel steel is divided into ordinary channel steel and light channel steel. The model and specification are also expressed in millimeters of waist height (h) × leg width (b) × waist thickness (d), such as 120 × 53 × 5 grooves. Steel, that is, the waist height is 120mm, the leg width is 53mm, and the waist thickness is 5mm.
Stainless Steel Bar
Stainless steel round bar belongs to a class of long products and a class of bars. The so-called stainless steel bar refers to a long product with a uniform circular cross section, generally about four meters long. It can be divided into light circle and black rod. The so-called light circle refers to the smooth surface, which is obtained by quasi-rolling; and the so-called black rod refers to the black and rough surface, which is directly hot-rolled.
Stainless Steel Angle Bar
Stainless steel angle steel is a carbon structural steel for construction. In use, it is required to have good weldability, plastic deformation performance and certain mechanical strength. The raw material billet for the production of stainless steel angle steel is low carbon square billet, and the finished stainless steel angle steel is delivered in hot-rolled, normalized or hot-rolled state.
Stainless Steel Seamless Pipe
Typically the stainless steel seamless pipes/tubes are multi-certified to international specifications. Our standard stock lengths are 6 to 6.1 metres, although some dimensions are also stocked in 12 metre+ lengths. For special requirements: eg, unusual dimensions, tight tolerances, specific surface roughness, cut-to-length tubes, we can usually provide options from production, with quick delivery times and very competitive pricing.
Stainless Steel Mirror Pipe
Polished stainless steel is one of the most popular finishes. The benefits of polished stainless steel include a smooth and shiny appearance and a higher resistance to corrosion than rougher stainless steel. Because the surface of the metal is so smooth, it will not capture dirt and bacteria as a rougher material would. Within the category of polished stainless steel, there are several different mechanically polished finishes. No. 4 (Brushed Finish), No. 6 (Fine Brushed Finish), No. 8 (Mirror Finish), etc.
_r__700-700_c__413f3b_.jpg?x-oss-process=style/small)
Wear Resistant Plate
Wear-resistant steel plates, also named abrasion-resistant plates (AR Plates), are used to reduce wear and tear on equipment surface caused by intense rolling abrasion and impact. The strength of these wear-resistant steel plates is enhanced by heat treatment such as quenching and tempering, or by adding some alloying elements, the original characteristics of the steel plates are intensified.
Tool Steel
Tool steel encompasses a wide variety of carbon and alloy steels that have particular mechanical or physical properties, such as strength, hardness, workability, abrasion, corrosion and heat resistance. This makes them well suited to be made into tools, essentially used in the shaping of other materials, and especially for drilling and cutting as they are able to hold a cutting edge at elevated temperatures. Tool steels contain differing amounts and combinations of tungsten, molybdenum, cobalt and vanadium.
Carbon Steel Plate
The width of the sheet is 500~1500 mm; The width of the thickness is 600~3000 mm. Thin Plates are classified by steel types, including ordinary steel, high quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. According to the professional use, there are oil drum with board, enamel with board, bulletproof with board, etc. According to the surface coating points, there are galvanized sheet, tin Plate, lead Plate, plastic composite steel Plate.
_r__1440-1080_c__66615f_.jpg?x-oss-process=style/small)
Carbon Steel Coil
The width of the sheet is 500~1500 mm; The width of the thickness is 600~3000 mm. Thin Coils are classified by steel types, including ordinary steel, high quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. According to the professional use, there are oil drum with board, enamel with board, bulletproof with board, etc. According to the surface coating points, there are galvanized sheet, tin Coil, lead Coil, plastic composite steel Coil.
暂无数据.No Data.